The fine line between automation and augmentation in website usability evaluation.

Artificial Intelligence (AI) systems are becoming widespread in all aspects of society, bringing benefits to the whole economy. There is a growing understanding of the potential benefits and risks of this type of technology. While the benefits are more efficient decision processes and industrial productivity, the risks may include a potential progressive disengagement of human beings in crucial aspects of decision-making. In this respect, a new perspective is emerging that aims at reconsidering the centrality of human beings while reaping the benefits of AI systems to augment rather than replace professional skills: Human-Centred AI (HCAI) is a novel framework that posits that high levels of human control do not contradict high levels of computer automation. In this paper, we investigate the two antipodes, automation vs augmentation, in the context of website usability evaluation. Specifically, we have analyzed whether the level of automation provided by a tool for semi-automatic usability evaluation can support evaluators in identifying usability problems. Three different visualizations, each one corresponding to a different level of automation, ranging from a full-automation approach to an augmentation approach, were compared in an experimental study. We found that a fully automated approach could help evaluators detect a significant number of medium and high-severity usability problems, which are the most critical in a software system; however, it also emerged that it was possible to detect more low-severity usability problems using one of the augmented approaches proposed in this paper.

A model-based cost-utility analysis of an automated notification system for deteriorating patients on general wards.

BACKGROUND: Delayed response to clinical deterioration of hospital inpatients is common. Deployment of an electronic automated advisory vital signs monitoring and notification system to signal clinical deterioration is associated with significant improvements in clinical outcomes but there is no evidence on the cost-effectiveness compared with routine monitoring, in the National Health Service (NHS) in the United Kingdom (UK). METHODS: A decision analytic model was developed to estimate the cost-effectiveness of an electronic automated advisory notification system versus standard care, in adults admitted to a district general hospital. Analyses considered: (1) the cost-effectiveness of the technology based on secondary analysis of patient level data of 3787 inpatients in a before-and-after study; and (2) the cost-utility (cost per quality-adjusted life-year (QALY)) over a lifetime horizon, extrapolated using published data. Analysis was conducted from the perspective of the NHS. Uncertainty in the model was assessed using a range of sensitivity analyses. RESULTS: The study population had a mean age of 68 years, 48% male, with a median inpatient stay of 6 days. Expected life expectancy at discharge was assumed to be 17.74 years. (1) Cost-effectiveness analysis: The automated notification system was more effective (-0.027 reduction in mean events per patient) and provided a cost saving of -£12.17 (-182.07 to 154.80) per patient admission. (2) Cost-utility analysis: Over a lifetime horizon the automated notification system was dominant, demonstrating a positive incremental QALY gain (0.0287 QALYs, equivalent to ~10 days of perfect health) and a cost saving of £55.35. At a threshold of £20,000 per QALY, the probability of automated monitoring being cost-effective in the NHS was 81%. Increased use of cableless sensors may reduce cost-savings, however, the intervention remains cost-effective at 100% usage (ICER: £3,107/QALY). Stratified cost-effectiveness analysis by age, National Early Warning Score (NEWS) on admission, and primary diagnosis indicated the automated notification system was cost-effective for most strategies and that use representative of the patient population studied was the most cost-saving strategy. CONCLUSION: Automated notification system for adult patients admitted to general wards appears to be a cost-effective use in the NHS; adopting this technology could be good use of scarce resources with significance for patient safety.

Delivering on a promise: futureproofing automated insect monitoring methods.

Due to rapid technological innovations, the automated monitoring of insect assemblages comes within reach. However, this continuous innovation endangers the methodological continuity needed for calculating reliable biodiversity trends in the future. Maintaining methodological continuity over prolonged periods of time is not trivial, since technology improves, reference libraries grow and both the hard- and software used now may no longer be available in the future. Moreover, because data on many species are collected at the same time, there will be no simple way of calibrating the outputs of old and new devices. To ensure that reliable long-term biodiversity trends can be calculated using the collected data, I make four recommendations: (1) Construct devices to last for decades, and have a five-year overlap period when devices are replaced. (2) Construct new devices to resemble the old ones, especially when some kind of attractant (e.g. light) is used. Keep extremely detailed metadata on collection, detection and identification methods, including attractants, to enable this. (3) Store the raw data (sounds, images, DNA extracts, radar/lidar detections) for future reprocessing with updated classification systems. (4) Enable forward and backward compatibility of the processed data, for example by in-silico data 'degradation' to match the older data quality. This article is part of the theme issue 'Towards a toolkit for global insect biodiversity monitoring'.

A qualitative interview study to determine barriers and facilitators of implementing automated decision support tools for genomic data access.

Data access committees (DAC) gatekeep access to secured genomic and related health datasets yet are challenged to keep pace with the rising volume and complexity of data generation. Automated decision support (ADS) systems have been shown to support consistency, compliance, and coordination of data access review decisions. However, we lack understanding of how DAC members perceive the value add of ADS, if any, on the quality and effectiveness of their reviews. In this qualitative study, we report findings from 13 semi-structured interviews with DAC members from around the world to identify relevant barriers and facilitators to implementing ADS for genomic data access management. Participants generally supported pilot studies that test ADS performance, for example in cataloging data types, verifying user credentials and tagging datasets for use terms. Concerns related to over-automation, lack of human oversight, low prioritization, and misalignment with institutional missions tempered enthusiasm for ADS among the DAC members we engaged. Tensions for change in institutional settings within which DACs operated was a powerful motivator for why DAC members considered the implementation of ADS into their access workflows, as well as perceptions of the relative advantage of ADS over the status quo. Future research is needed to build the evidence base around the comparative effectiveness and decisional outcomes of institutions that do/not use ADS into their workflows.

Automatic left ventricle volume and mass quantification from 2D cine-MRI: Investigating papillary muscle influence.

OBJECTIVE: Early detection of cardiovascular diseases is based on accurate quantification of the left ventricle (LV) function parameters. In this paper, we propose a fully automatic framework for LV volume and mass quantification from 2D-cine MR images already segmented using U-Net. METHODS: The general framework consists of three main steps: Data preparation including automatic LV localization using a convolution neural network (CNN) and application of morphological operations to exclude papillary muscles from the LV cavity. The second step consists in automatically extracting the LV contours using U-Net architecture. Finally, by integrating temporal information which is manifested by a spatial motion of myocytes as a third dimension, we calculated LV volume, LV ejection fraction (LVEF) and left ventricle mass (LVM). Based on these parameters, we detected and quantified cardiac contraction abnormalities using Python software. RESULTS: CNN was trained with 35 patients and tested on 15 patients from the ACDC database with an accuracy of 99,15 %. U-Net architecture was trained using ACDC database and evaluated using local dataset with a Dice similarity coefficient (DSC) of 99,78 % and a Hausdorff Distance (HD) of 4.468 mm (p < 0,001). Quantification results showed a strong correlation with physiological measures with a Pearson correlation coefficient (PCC) of 0,991 for LV volume, 0.962 for LVEF, 0.98 for stroke volume (SV) and 0.923 for LVM after pillars' elimination. Clinically, our method allows regional and accurate identification of pathological myocardial segments and can serve as a diagnostic aid tool of cardiac contraction abnormalities. CONCLUSION: Experimental results prove the usefulness of the proposed method for LV volume and function quantification and verify its potential clinical applicability.

Automatic offline-capable smartphone paper-based microfluidic device for efficient biomarker detection of Alzheimer's disease.

BACKGROUND: Alzheimer's disease (AD) is a prevalent neurodegenerative disease with no effective treatment. Efficient and rapid detection plays a crucial role in mitigating and managing AD progression. Deep learning-assisted smartphone-based microfluidic paper analysis devices (µPADs) offer the advantages of low cost, good sensitivity, and rapid detection, providing a strategic pathway to address large-scale disease screening in resource-limited areas. However, existing smartphone-based detection platforms usually rely on large devices or cloud servers for data transfer and processing. Additionally, the implementation of automated colorimetric enzyme-linked immunoassay (c-ELISA) on µPADs can further facilitate the realization of smartphone µPADs platforms for efficient disease detection. RESULTS: This paper introduces a new deep learning-assisted offline smartphone platform for early AD screening, offering rapid disease detection in low-resource areas. The proposed platform features a simple mechanical rotating structure controlled by a smartphone, enabling fully automated c-ELISA on µPADs. Our platform successfully applied sandwich c-ELISA for detecting the ß-amyloid peptide 1-42 (Aß 1-42, a crucial AD biomarker) and demonstrated its efficacy in 38 artificial plasma samples (healthy: 19, unhealthy: 19, N = 6). Moreover, we employed the YOLOv5 deep learning model and achieved an impressive 97 % accuracy on a dataset of 1824 images, which is 10.16 % higher than the traditional method of curve-fitting results. The trained YOLOv5 model was seamlessly integrated into the smartphone using the NCNN (Tencent's Neural Network Inference Framework), enabling deep learning-assisted offline detection. A user-friendly smartphone application was developed to control the entire process, realizing a streamlined "samples in, answers out" approach. SIGNIFICANCE: This deep learning-assisted, low-cost, user-friendly, highly stable, and rapid-response automated offline smartphone-based detection platform represents a good advancement in point-of-care testing (POCT). Moreover, our platform provides a feasible approach for efficient AD detection by examining the level of Aß 1-42, particularly in areas with low resources and limited communication infrastructure.

Finely-Tuning Chemiluminescent Color of CdTe Nanocrystals and Its Application for Near-Infrared Semi-Automatic Immunoassay.

Chemiluminescence (CL), especially commercialized CL immunoassay (CLIA), is normally performed within the eye-visible region of the spectrum by exploiting the electronic-transition-related emission of the molecule luminophore. Herein, dual-stabilizers-capped CdTe nanocrystals (NCs) is employed as a model of nanoparticulated luminophore to finely tune the CL color with superior color purity. Initialized by oxidizing the CdTe NCs with potassium periodate (KIO4), intermediates of the reactive oxygen species (ROS) tend to charge CdTe NCs in both series-connection and parallel-connection routes and dominate the charge-transfer CL of CdTe NCs. The CdTe NCs/KIO4 system can exhibit color-tunable CL with the maximum emission wavelength shifted from 694 nm to 801 nm, and the red-shift span is over 100 nm. Both PL and CL of each of the CdTe NCs are bandgap-engineered; the change in the NCs surface state via CL reaction enables CL of each of the CdTe NCs to be red-shifted for ∼20 nm to PL, while the change in the NCs surface state via labeling CdTe NCs to secondary-antibody (Ab2) enables CL of the CdTe NCs-Ab2 conjugates to be red-shifted for another ∼20 nm to bare CdTe NCs. The CL of CdTe753-Ab2/KIO4 is ∼791 nm, which can perform near-infrared CL immunoassay and semi-automatically determined procalcitonin (PCT) on commercialized in vitro diagnosis (IVD) instruments.

Automated treatment planning for whole breast irradiation with individualized tangential IMRT fields.

PURPOSES: This study aimed to develop and validate algorithms for automating intensity modulated radiation therapy (IMRT) planning in breast cancer patients, with a focus on patient anatomical characteristics. MATERIAL AND METHODS: We retrospectively selected 400 breast cancer patients without lymph node involvement for automated treatment planning. Automation was achieved using the Eclipse Scripting Application Programming Interface (ESAPI) integrated into the Eclipse Treatment Planning System. We employed three beam insertion geometries and three optimization strategies, resulting in 3600 plans, each delivering a 40.05 Gy dose in 15 fractions. Gantry angles in the tangent fields were selected based on a criterion involving the minimum intersection area between the Planning Target Volume (PTV) and the ipsilateral lung in the Beam's Eye View projection. ESAPI was also used to gather patient anatomical data, serving as input for Random Forest models to select the optimal plan. The Random Forest classification considered both beam insertion geometry and optimization strategy. Dosimetric data were evaluated in accordance with the Radiation Therapy Oncology Group (RTOG) 1005 protocol. RESULTS: Overall, all approaches generated high-quality plans, with approximately 94% meeting the acceptable dose criteria for organs at risk and/or target coverage as defined by RTOG guidelines. Average automated plan generation time ranged from 6 min and 37 s to 9 min and 22 s, with the mean time increasing with additional fields. The Random Forest approach did not successfully enable automatic planning strategy selection. Instead, our automated planning system allows users to choose from the tested geometry and strategy options. CONCLUSIONS: Although our attempt to correlate patient anatomical features with planning strategy using machine learning tools was unsuccessful, the resulting dosimetric outcomes proved satisfactory. Our algorithm consistently produced high-quality plans, offering significant time and efficiency advantages.

Clinical physicists' perceptions of weekly chart checks and the potential role for automated image review assessed by structured interviews.

BACKGROUND: This study utilizes interviews of clinical medical physicists to investigate self-reported shortcomings of the current weekly chart check workflow and opportunities for improvement. METHODS: Nineteen medical physicists were recruited for a 30-minute semi-structured interview, with a particular focus placed on image review and the use of automated tools for image review in weekly checks. Survey-type questions were used to gather quantitative information about chart check practices and importance placed on reducing chart check workloads versus increasing chart check effectiveness. Open-ended questions were used to probe respondents about their current weekly chart check workflow, opinions of the value of weekly chart checks and perceived shortcomings, and barriers and facilitators to the implementation of automated chart check tools. Thematic analysis was used to develop common themes across the interviews. RESULTS: Physicists ranked highly the value of reducing the time spent on weekly chart checks (average 6.3 on a scale from 1 to 10), but placed more value on increasing the effectiveness of checks with an average of 9.2 on a 1-10 scale. Four major themes were identified: (1) weekly chart checks need to adapt to an electronic record-and-verify chart environment, (2) physicists could add value to patient care by analyzing images without duplicating the work done by physicians, (3) greater support for trending analysis is needed in weekly checks, and (4) automation has the potential to increase the value of physics checks. CONCLUSION: This study identified several key shortcomings of the current weekly chart check process from the perspective of the clinical medical physicist. Our results show strong support for automating components of the weekly check workflow in order to allow for more effective checks that emphasize follow-up, trending, failure modes and effects analysis, and allow time to be spent on other higher value tasks that improve patient safety.

How would autonomous vehicles behave in real-world crash scenarios?

Autonomous Vehicles (AVs) have the potential to revolutionize transportation systems by enhancing traffic safety. Safety testing is undoubtedly a critical step for enabling large-scale deployment of AVs. High-risk scenarios are particularly important as they pose significant challenges and provide valuable insights into the driving capabilities of AVs. This study presents a novel approach to assess the safety of AVs using in-depth crash data, with a particular focus on real-world crash scenarios. First, based on the high-definition video recording of the whole process prior to the crash occurrences, 453 real-world crashes involving 596 passenger cars from China In-depth Mobility Safety Study-Traffic Accident (CIMSS-TA) database were reconstructed. Pertinent static and dynamic elements needed for the construction of the testing scenarios were extracted. Subsequently, 596 testing scenarios were created via each passenger car's perspective within the simulation platform. Following this, each of the crash-involved passenger cars was replaced with Baidu Apollo, a famous automated driving system (ADS), for counterfactual simulation. Lastly, the safety performance of the AV was assessed using the simulation results. A logit model was utilized to identify the fifteen crucial scenario elements that have significant impacts on the test results. The findings demonstrated that the AV could avoid 363 real-world crashes, accounting for approximately 60.91% of the total, and effectively mitigated injuries in the remaining 233 unavoidable scenarios compared to a human driver. Moreover, the AV maintain a smoother speed in most of the scenarios. The common feature of these unavoidable scenarios is that the AV is in a passive state, and the crashes are not caused by the AV violating traffic rules, but rather caused by abnormal behavior exhibited by the human drivers. Additionally, seven specific scenarios have been identified wherein AVs are unable to avoid a crash. These findings demonstrate that, compared to human drivers, AVs can avoid crashes that are difficult for humans to avoid, thereby enhancing traffic safety.

Gaze entropy metrics for mental workload estimation are heterogenous during hands-off level 2 automation.

As the level of vehicle automation increases, drivers are more likely to engage in non-driving related tasks which take their hands, eyes, and/or mind away from the driving task. Consequently, there has been increased interest in creating Driver Monitoring Systems (DMS) that are valid and reliable for detecting elements of driver state. Workload is one element of driver state that has remained elusive within the literature. Whilst there has been promising work in estimating mental workload using gaze-based metrics, the literature has placed too much emphasis on point estimate differences. Whilst these are useful for establishing whether effects exist, they ignore the inherent variability within individuals and between different drivers. The current work builds on this by using a Bayesian distributional modelling approach to quantify the within and between participants variability in Information Theoretical gaze metrics. Drivers (N = 38) undertook two experimental drives in hands-off Level 2 automation with their hands and feet away from operational controls. During both drives, their priority was to monitor the road before a critical takeover. During one drive participants had to complete a secondary cognitive task (2-back) during the hands-off Level 2 automation. Changes in Stationary Gaze Entropy and Gaze Transition Entropy were assessed for conditions with and without the 2-back to investigate whether consistent differences between workload conditions could be found across the sample. Stationary Gaze Entropy proved a reliable indicator of mental workload; 92 % of the population were predicted to show a decrease when completing 2-back during hands-off Level 2 automated driving. Conversely, Gaze Transition Entropy showed substantial heterogeneity; only 66 % of the population were predicted to have similar decreases. Furthermore, age was a strong predictor of the heterogeneity of the average causal effect that high mental workload had on eye movements. These results indicate that, whilst certain elements of Information Theoretic metrics can be used to estimate mental workload by DMS, future research needs to focus on the heterogeneity of these processes. Understanding this heterogeneity has important implications toward the design of future DMS and thus the safety of drivers using automated vehicle functions. It must be ensured that metrics used to detect mental workload are valid (accurately detecting a particular driver state) as well as reliable (consistently detecting this driver state across a population).

Automated detection of methicillin-resistant Staphylococcus aureus with the MRSA CHROM imaging application on BD Kiestra Total Lab Automation System.

The virulence of methicillin-resistant Staphylococcus aureus (MRSA) and its potentially fatal outcome necessitate rapid and accurate detection of patients colonized with MRSA in healthcare settings. Using the BD Kiestra Total Lab Automation (TLA) System in conjunction with the MRSA Application (MRSA App), an imaging application that uses artificial intelligence to interpret colorimetric information (mauve-colored colonies) indicative of MRSA pathogen presence on CHROMagar chromogenic media, anterior nares specimens from three sites were evaluated for the presence of mauve-colored colonies. Results obtained with the MRSA App were compared to manual reading of agar plate images by proficient laboratory technologists. Of 1,593 specimens evaluated, 1,545 (96.98%) were concordant between MRSA App and laboratory technologist reading for the detection of MRSA growth [sensitivity 98.15% (95% CI, 96.03, 99.32) and specificity 96.69% (95% CI, 95.55, 97.60)]. This multi-site study is the first evaluation of the MRSA App in conjunction with the BD Kiestra TLA System. Using the MRSA App, our results showed 98.15% sensitivity and 96.69% specificity for the detection of MRSA from anterior nares specimens. The MRSA App, used in conjunction with laboratory automation, provides an opportunity to improve laboratory efficiency by reducing laboratory technologists' labor associated with the review and interpretation of cultures.

CNN application for automated determination of the patient's size to obtain the size-specific dose estimated in CT.

Introduction. The currently available dosimetry techniques in computed tomography can be inaccurate which overestimate the absorbed dose. Therefore, we aimed to provide an automated and fast methodology to more accurately calculate the SSDE usingDwobtained by using CNN from thorax and abdominal CT study images.Methods. The SSDE was determined from the 200 records files. For that purpose, patients' size was measured in two ways: (a) by developing an algorithm following the AAPM Report No. 204 methodology; and (b) using a CNN according to AAPM Report No. 220.Results. The patient's size measured by the in-house software in the region of thorax and abdomen was 27.63 ± 3.23 cm and 28.66 ± 3.37 cm, while CNN was 18.90 ± 2.6 cm and 21.77 ± 2.45 cm. The SSDE in thorax according to 204 and 220 reports were 17.26 ± 2.81 mGy and 23.70 ± 2.96 mGy for women and 17.08 ± 2.09 mGy and 23.47 ± 2.34 mGy for men. In abdomen was 18.54 ± 2.25 mGy and 23.40 ± 1.88 mGy in women and 18.37 ± 2.31 mGy and 23.84 ± 2.36 mGy in men.Conclusions. Implementing CNN-based automated methodologies can contribute to fast and accurate dose calculations, thereby improving patient-specific radiation safety in clinical practice.

Fully automatic online geometric calibration for non-circular cone-beam CT orbits using fiducials with unknown placement.

BACKGROUND: Cone-beam CT (CBCT) with non-circular scanning orbits can improve image quality for 3D intraoperative image guidance. However, geometric calibration of such scans can be challenging. Existing methods typically require a prior image, specialized phantoms, presumed repeatable orbits, or long computation time. PURPOSE: We propose a novel fully automatic online geometric calibration algorithm that does not require prior knowledge of fiducial configuration. The algorithm is fast, accurate, and can accommodate arbitrary scanning orbits and fiducial configurations. METHODS: The algorithm uses an automatic initialization process to eliminate human intervention in fiducial localization and an iterative refinement process to ensure robustness and accuracy. We provide a detailed explanation and implementation of the proposed algorithm. Physical experiments on a lab test bench and a clinical robotic C-arm scanner were conducted to evaluate spatial resolution performance and robustness under realistic constraints. RESULTS: Qualitative and quantitative results from the physical experiments demonstrate high accuracy, efficiency, and robustness of the proposed method. The spatial resolution performance matched that of our existing benchmark method, which used a 3D-2D registration-based geometric calibration algorithm. CONCLUSIONS: We have demonstrated an automatic online geometric calibration method that delivers high spatial resolution and robustness performance. This methodology enables arbitrary scan trajectories and should facilitate translation of such acquisition methods in a clinical setting.

Screening Automation in Systematic Reviews: Analysis of Tools and Their Machine Learning Capabilities.

Systematic reviews provide robust evidence but require significant human labor, a challenge that can be mitigated with digital tools. This paper focuses on machine learning (ML) support for the title and abstract screening phase, the most time-intensive aspect of the systematic review process. The existing literature was systematically reviewed and five promising tools were analyzed, focusing on their ability to reduce human workload and their application of ML. This paper details the current state of automation capabilities and highlights significant research findings that point towards further improvements in the field. Directions for future research in this evolving field are outlined, with an emphasis on the need for a cautious application of existing systems.

Automated Region of Interest-Based Data Augmentation for Fallen Person Detection in Off-Road Autonomous Agricultural Vehicles.

Due to the global population increase and the recovery of agricultural demand after the COVID-19 pandemic, the importance of agricultural automation and autonomous agricultural vehicles is growing. Fallen person detection is critical to preventing fatal accidents during autonomous agricultural vehicle operations. However, there is a challenge due to the relatively limited dataset for fallen persons in off-road environments compared to on-road pedestrian datasets. To enhance the generalization performance of fallen person detection off-road using object detection technology, data augmentation is necessary. This paper proposes a data augmentation technique called Automated Region of Interest Copy-Paste (ARCP) to address the issue of data scarcity. The technique involves copying real fallen person objects obtained from public source datasets and then pasting the objects onto a background off-road dataset. Segmentation annotations for these objects are generated using YOLOv8x-seg and Grounded-Segment-Anything, respectively. The proposed algorithm is then applied to automatically produce augmented data based on the generated segmentation annotations. The technique encompasses segmentation annotation generation, Intersection over Union-based segment setting, and Region of Interest configuration. When the ARCP technique is applied, significant improvements in detection accuracy are observed for two state-of-the-art object detectors: anchor-based YOLOv7x and anchor-free YOLOv8x, showing an increase of 17.8% (from 77.8% to 95.6%) and 12.4% (from 83.8% to 96.2%), respectively. This suggests high applicability for addressing the challenges of limited datasets in off-road environments and is expected to have a significant impact on the advancement of object detection technology in the agricultural industry.

Applications of Artificial Intelligence, Machine Learning, and Deep Learning in Nutrition: A Systematic Review.

In industry 4.0, where the automation and digitalization of entities and processes are fundamental, artificial intelligence (AI) is increasingly becoming a pivotal tool offering innovative solutions in various domains. In this context, nutrition, a critical aspect of public health, is no exception to the fields influenced by the integration of AI technology. This study aims to comprehensively investigate the current landscape of AI in nutrition, providing a deep understanding of the potential of AI, machine learning (ML), and deep learning (DL) in nutrition sciences and highlighting eventual challenges and futuristic directions. A hybrid approach from the systematic literature review (SLR) guidelines and the preferred reporting items for systematic reviews and meta-analyses (PRISMA) guidelines was adopted to systematically analyze the scientific literature from a search of major databases on artificial intelligence in nutrition sciences. A rigorous study selection was conducted using the most appropriate eligibility criteria, followed by a methodological quality assessment ensuring the robustness of the included studies. This review identifies several AI applications in nutrition, spanning smart and personalized nutrition, dietary assessment, food recognition and tracking, predictive modeling for disease prevention, and disease diagnosis and monitoring. The selected studies demonstrated the versatility of machine learning and deep learning techniques in handling complex relationships within nutritional datasets. This study provides a comprehensive overview of the current state of AI applications in nutrition sciences and identifies challenges and opportunities. With the rapid advancement in AI, its integration into nutrition holds significant promise to enhance individual nutritional outcomes and optimize dietary recommendations. Researchers, policymakers, and healthcare professionals can utilize this research to design future projects and support evidence-based decision-making in AI for nutrition and dietary guidance.

Automatic Microfluidic Harmonized RAA-CRISPR Diagnostic System for Rapid and Accurate Identification of Bacterial Respiratory Tract Infections.

Respiratory tract infections (RTIs) pose a grave threat to human health, with bacterial pathogens being the primary culprits behind severe illness and mortality. In response to the pressing issue, we developed a centrifugal microfluidic chip integrated with a recombinase-aided amplification (RAA)-clustered regularly interspaced short palindromic repeats (CRISPR) system to achieve rapid detection of respiratory pathogens. The limitations of conventional two-step CRISPR-mediated systems were effectively addressed by employing the all-in-one RAA-CRISPR detection method, thereby enhancing the accuracy and sensitivity of bacterial detection. Moreover, the integration of a centrifugal microfluidic chip led to reduced sample consumption and significantly improved the detection throughput, enabling the simultaneous detection of multiple respiratory pathogens. Furthermore, the incorporation of Chelex-100 in the sample pretreatment enabled a sample-to-answer capability. This pivotal addition facilitated the deployment of the system in real clinical sample testing, enabling the accurate detection of 12 common respiratory bacteria within a set of 60 clinical samples. The system offers rapid and reliable results that are crucial for clinical diagnosis, enabling healthcare professionals to administer timely and accurate treatment interventions to patients.

FedDUS: Lung tumor segmentation on CT images through federated semi-supervised with dynamic update strategy.

BACKGROUND AND OBJECTIVE: Lung tumor annotation is a key upstream task for further diagnosis and prognosis. Although deep learning techniques have promoted automation of lung tumor segmentation, there remain challenges impeding its application in clinical practice, such as a lack of prior annotation for model training and data-sharing among centers. METHODS: In this paper, we use data from six centers to design a novel federated semi-supervised learning (FSSL) framework with dynamic model aggregation and improve segmentation performance for lung tumors. To be specific, we propose a dynamically updated algorithm to deal with model parameter aggregation in FSSL, which takes advantage of both the quality and quantity of client data. Moreover, to increase the accessibility of data in the federated learning (FL) network, we explore the FAIR data principle while the previous federated methods never involve. RESULT: The experimental results show that the segmentation performance of our model in six centers is 0.9348, 0.8436, 0.8328, 0.7776, 0.8870 and 0.8460 respectively, which is superior to traditional deep learning methods and recent federated semi-supervised learning methods. CONCLUSION: The experimental results demonstrate that our method is superior to the existing FSSL methods. In addition, our proposed dynamic update strategy effectively utilizes the quality and quantity information of client data and shows efficiency in lung tumor segmentation. The source code is released on (https://github.com/GDPHMediaLab/FedDUS).

Understanding and Mitigating Bias in Imaging Artificial Intelligence.

Artificial intelligence (AI) algorithms are prone to bias at multiple stages of model development, with potential for exacerbating health disparities. However, bias in imaging AI is a complex topic that encompasses multiple coexisting definitions. Bias may refer to unequal preference to a person or group owing to preexisting attitudes or beliefs, either intentional or unintentional. However, cognitive bias refers to systematic deviation from objective judgment due to reliance on heuristics, and statistical bias refers to differences between true and expected values, commonly manifesting as systematic error in model prediction (ie, a model with output unrepresentative of real-world conditions). Clinical decisions informed by biased models may lead to patient harm due to action on inaccurate AI results or exacerbate health inequities due to differing performance among patient populations. However, while inequitable bias can harm patients in this context, a mindful approach leveraging equitable bias can address underrepresentation of minority groups or rare diseases. Radiologists should also be aware of bias after AI deployment such as automation bias, or a tendency to agree with automated decisions despite contrary evidence. Understanding common sources of imaging AI bias and the consequences of using biased models can guide preventive measures to mitigate its impact. Accordingly, the authors focus on sources of bias at stages along the imaging machine learning life cycle, attempting to simplify potentially intimidating technical terminology for general radiologists using AI tools in practice or collaborating with data scientists and engineers for AI tool development. The authors review definitions of bias in AI, describe common sources of bias, and present recommendations to guide quality control measures to mitigate the impact of bias in imaging AI. Understanding the terms featured in this article will enable a proactive approach to identifying and mitigating bias in imaging AI. Published under a CC BY 4.0 license. Test Your Knowledge questions for this article are available in the supplemental material. See the invited commentary by Rouzrokh and Erickson in this issue.